Diamond Coated Tools
Drills, Routers, End Mills, Countersinks, Threadmills, Chamfer Cutters
SERIES
TYPE
COATING
Diameter Range
MATERIALS
REQUEST A SAMPLE
Undercut Drill
MicroSpeed X
.30mm – .45mm
– Halogen Free Material
– Laminates w/ fillers
– High Tg material ≥ 150°C
– Technical Ceramics
Undercut Drill
MicroSpeed
.50mm – 1.25mm
– Laminates w/ fillers
– High Tg material ≥ 150°C
– Technical Ceramics
Drill
MicroSpeed
1.30mm- 3.175mm
– IMS
– Aluminum
– Copper
– High Tg material ≥ 200°C ( RO4xxx, Arlon 25x, Isola IS 620)
– Glass
– Quartz
– Technical Ceramics
Undercut Drill
MicroSpeedX
.15mm – 1.50mm
– Glass
– Quartz
– Technical Ceramics
Inverse Drill
MicroSpeed
3.20mm – 6.40mm
– IMS
– Aluminum
– Copper
– High Tg material ≥ 200°C ( RO4xxx, Arlon 25x, Isola IS 620)
– Glass
– Quartz
– Technical Ceramics
Router
Extra Fine Spiral Cut
MicroSpeed
1.10mm – 3.175mm
– FR4
– Halogen-free
– Laminates with fillers and Tg ≥ 185°C
– Laminates with fillers and Tg ≥ 200°C
– Depaneling
Router
Chip Breaker Extra Fine
MicroSpeedX
1.50mm – 2.40mm
– Halogen-free
– Laminates with fillers and Tg ≥ 185°C
– Laminates with fillers and Tg ≥ 200°C
– Depaneling
Router
Square Chip Breaker
MicroSpeed
.80mm – 3.00mm
– FR4
– Halogen-free
– Laminates with fillers and Tg ≥ 185°C
– Laminates with fillers and Tg ≥ 200°C
– Depaneling
Router
Diamond Cut
MicroSpeed
1.20mm – 3.17mm
– FR4
– Halogen-free
– Laminates with fillers and Tg ≥ 185°C
– Laminates with fillers and Tg ≥ 200°C
– Depaneling
Router
Diamond Cut
MicroSpeed
1.50mm – 3.17mm
– Laminates with fillers and Tg ≥ 185°C
– Laminates with fillers and Tg ≥ 200°C
2FL End mill
MicroSpeed
.30mm – 3.00mm
– FR4
– Halogen-free materials
– Laminates with fillers and Tg ≥ 185°
– Laminates with fillers and Tg ≥ 200°C
– IMS & non-ferrous metals (aluminum)
– Depaneling (IMS)
1FL End mill
MicroSpeed
1.60mm – 3.00mm
– FR4
– Halogen-free materials
– Laminates with fillers and Tg ≥ 185°
– Laminates with fillers and Tg ≥ 200°C
– IMS & non-ferrous metals (copper)
– Depaneling (IMS)
Threadill
MicroSpeed
M1.6 x 0.35 – M5
– Laminates with fillers and Tg ≥ 185°
– Laminates with fillers and Tg ≥ 200°C
– IMS & non-ferrous metals (copper)
– Technical Ceramics
Threadill
MicroSpeedX
M1.6 x 0.35 – M5
– Laminates with fillers and Tg ≥ 185°
– IMS & non-ferrous metals (copper)
– Technical Ceramics
5FL Countersink
MicroSpeed
90°/ 120°/ 140°
– IMS & non-ferrous metals
– Technical Ceramics
Chamfer Cutter
1FL, helical design
MicroSpeed
30°/ 45°/ 60°/82°/ 90°
– FR4
– Hologen-free materials
– Laminates with fillers and Tg ≥ 185°
– Laminates with fillers and Tg ≥ 200°C
– IMS & non-ferrous metals
– Technical Ceramics