Large channel cross-sections and a direct feed, the HTR spray head can be used with especially critical and viscous media. The metering is controlled at the front of the nozzle.
The HTR spray head is available variants
HTRR – has an M6 thread for fastening to a customer-side mount.
HTRB – has a ball joint which allows it to be attached flexibly and precisely with the flexible mounts.
- Low pressure range of 0.5 – 2.5 bar
- Air consumption of 2 -5.5 /min
- Viscosity range 2.300mm²/s (20°C) – 500 mm²/s (40°C)
- Spray with nearly round cone full of about 15 °
- Available in the nozzle lengths 50mm, 85mm, 110mm and 135mm